|
Gary VE7GMF lines up his copper slim jim while Bill VE7VTC solders.
|
Thomas VE7TCE hoping to try out John's (VE7WTH) satellite antenna. There
are no photos of John because he was busy taking them. Thanks for the pix,
John. Next time we will get one of you ! |
|
Helen VE7HBE shows off some fancy soldering
|
Gary VE7GMF works on his feedpoint. Gary was kind enough to let us use his
excellent workshop to build these antennas. Thanks Gary !
|
Dexter VA7ETO helps Bob VA7MOT build his copper J pole
|
Thomas VE7TCE works on his ladderline J pole while Bill VE7VTC gets him a
connector.
|
|
Gary VE7GMF lines up his copper slim jim (Dexter VA7ETO in background).
|
Bill VE7VTC helps David VA7SKN build a 450 ohm ladderline roll up J pole.
|
|
Gary VE7GMF, Bob VA7MOT, Bill VE7VTC (helper), David VA7SKN,and
Thomas VE7TCE prepare to build their antennas.
Back
|
